4. Build Sample Joints.
4. Build Sample Joints.
Welcome to Carpentry
Lesson Plan: Week 1 - Welcome to Carpentry (6 Hours)
Lesson Plan: Week 1 - Welcome to Carpentry (6 Hours)
Lesson Plan Document: Week 2 - Measure Twice, Cut Once (6 Hours)
Lesson Plan Document: Week 2 - Measure Twice, Cut Once (6 Hours)
Lesson Plan Document: Week 3 - Introduction to Hand Tools.
Lesson Plan Document: Week 3 - Introduction to Hand Tools.
Lesson Plan Document: Week 4 - Introduction to Power Tools.
Lesson Plan Document: Week 4 - Introduction to Power Tools.
Lesson Plan Document: Week 5 - Introduction to Wood Types.
Lesson Plan Document: Week 5 - Introduction to Wood Types.
Lesson Plan Document: Week 6 – Fasteners and Joinery.
Lesson Plan Document: Week 6 – Fasteners and Joinery.
Lesson Plan Document: Week 7 – Blueprint Reading & Design.
Lesson Plan Document: Week 7 – Blueprint Reading & Design.
Lesson Plan Document: Week 8 – Framing Basics.
Lesson Plan Document: Week 8 – Framing Basics.
Lesson Plan Document: Week 9 – Finish Carpentry.
Lesson Plan Document: Week 9 – Finish Carpentry.
Week 10 - Final Carpentry Project: Build a Small Bench with Shelf
Week 10 - Final Carpentry Project: Build a Small Bench with Shelf
Objective
Build and evaluate at least two types of basic wood joints from home, and reflect on the process and strength of each.
Instructions
Follow these steps. Use the checklist below to track your progress.
✅ Student Checklist
Watch the short video demo on wood joints
Gather your materials: 3–4 small wood pieces, glue or screws, dowels (optional), tools (clamp,screwdriver, etc.).
Build 2 sample joints (choose from: Butt, Lap, or Dowel).
Label each joint with its name and fastening method.
Take a picture of each joint.
Complete the reflection questions.
Reflection Questions
1. Which joint felt strongest during your build? Why?
2. Which joint was easiest to make? Why?
3. Where do you think each joint could be used in real life?